XHS-20000 polyethylene snow melting spreader

The post-hanging type salt-spreading machine is mainly used for road, residential area, airport and other roads to sprinkle salt and snow in winter. Our machine adopts imported polyethylene material production technology, DC deceleration motor drive, the use of automotive battery power supply to provide power, non-polar speed regulation to adjust the distribution width, its main characteristics are low power consumption, energy saving and environmental protection, no harmful gas, corrosion resistance, durability, The corrosion problem of traditional salt spraying equipment is solved

1.It adopts a polyethylene composite structure, and the volume of a single barrel is 1 cubic * 2 = 2 cubic. Advantages: It is stronger than a single barrel structure.

2. The upper part of the dragon adopts a triangular umbrella-shaped baffle and adopts a side leakage feeding method to prevent the snow melting agent from pressing the dragon for a long time, causing the dragon to become overloaded and hollow after the snow melting agent is extruded.

3. The controller adopts overload and over-current protection to prevent equipment parts from being burned if large objects enter the spreader and become stuck.

4. The rear of the spreader is equipped with lighting and warning devices to prevent the rear of the spreader from being too close to the vehicle and reduce the occurrence of accidents.

5. The bilateral vibrators are installed in a layout of left front and right rear to achieve the best vibration effect and avoid the accumulation of partial snow melting agent.

6. The controller adopts self-developed chip control, with reasonable logic, easy to use and learn, and convenient and simple for workers to operate.

7. The spreading disc is made of low-temperature-resistant rubber material, which is wear-resistant and low-temperature resistant, with a diameter of ≥36.8cm polyester.

8. The Jiaolong motor and the spreader motor use low-temperature lubricating grease to prevent freezing and jamming of the teeth during low-temperature operations.
9. Our company uses dual high-frequency vibrators on the left and right sides, which is superior to similar products.