Home / products / Crack Sealing Machine /

Crack Sealing Machine GD5X-400J

Crack Sealing Machine GD5X-400J

Crack Sealing Machine GD5X-400J is specially used to sealing the crack and crevices in the pavement of express ways, highways, municipal streets and airports after new opening and heavy repaired.

Model:

GD5X-400J
Engine:Honda Series
Capacity :400 L

Product introduction

Specially used to sealing the crack and crevices in the pavement of express ways, highways, municipal streets and airports after new opening and heavy repaired. After notched by crack router and sealing by special sealing glue,ensure the whole usability and working time.

Product Advantage

1. Security and humanized design
With a spring shock absorber and gas spring shock absorber dual shock absorption system, greatly improving the safety performance of walking, hot melt kettle has two front and rear feed port, feed pump switch located in the operating handle, easy to operate construction.

2. High performance generator
Generator with 5.5 kilowatt diesel generator, easy to start. High-quality silent generator, can provide stable and efficient power source for the filling and sewing machine, and fully guarantee the work efficiency in daily road maintenance. Stable and reliable, low noise, low pollution.

3. Temperature control box
Japan Omron brand dual digital LCD thermostat timely display and adjust the heat transfer oil temperature, sealant temperature and irrigation hose temperature, temperature display intuitive and accurate, through three centralized temperature distribution switch can be controlled independently, easy to operate . Through the temperature controller, according to customer choice of different types of sealant set the control temperature, you can automatically monitor the temperature, control the machine's working condition, improve work efficiency and save fuel consumption.

4. Irrigation gun
The unique electric control switch on the handle of the gun can remotely control the pump and reduce the waste of sealant.

5. Heat conduction oil system
Melt with a heat transfer oil hot melt kettle, indirect heating, the temperature can be adjusted on demand, automatic temperature control system, will never burn the filling material. The hot melt kettle thermal transfer oil sandwich design than similar products using less heat transfer oil, to further improve the heating rate, reduce the replacement cost.

6. Special geometry of the combustion chamber
Flame to 45 degrees oblique angle to the combustion chamber wall, not with the hot-melt kettle in direct contact with the hot room air, combustion, high heat utilization.

7. Discharge hose
220V 4.8 meters long electric heating hose, the middle of the hose is not connected to avoid the similar products in the hose and spray gun combined leakage of hidden dangers, 270 degrees on demand free rotation, longer life, high resistance hose Fold fully meet the road maintenance in the construction of horizontal and vertical cracks in the actual work needs to ensure that the largest construction area.

8. Minimum loading height
The whole structure is compact, reasonable, the operation bit and stuffing mouth is low, the inlet mouth with a splash plate, improve the safety of feeding operation, the material box and the hose has insulation materials,to avoid scalding operators.To ensure easy feeding operation, effort and safety.

9. Electric agitator
Mixer motor imported brand variable speed motor motor, simple structure, easy to use, easy to maintain.

10. Moving Way—Electric walking or Trailer type
Small size, light weight, trailer / electric walking can be, just two people can carry out construction, driving speed is 50 KM/H.

11. Grouting nozzle mouth to facilitate replacement
According to the crack and the road surface using the appropriate gun mouth, irrigation joints to achieve the best results.

Product parameters

Model

GD5X-400J

Overall Size

( L*W*H) MM

4100×1640×1960

Net Weight(T)

1.3

Drum Capacity(L)

400

Heat Time(min/kg)

45/100

Generator Part

Generator

Honda Gasoline Generator Set

Starting Mode

Hand starting

Rated Power (KW)

3

Transporting System

Feed Pump

Domestic Feed Pump Flow:2m³/H Pressure: 0.16 Mpa

Driving System

Motor Rated Power(KW)

5.5

Voltage

DC72V

Driving Speed(KM/H)

55

Endurance Mileage(KM)

60

Automatic Constant Temperature Control System

LCD Thermostat

Japan Omron

Thermocouple

K-type thermocouple imports

Relays

Domestic brands

Heat Conduction Oil

Changcheng/L-QB300

Heat Conducting Oil Volume(L)

80

Electric Heating Hoses

And Burners

Electric Heating Hose

220V Domestic hose  Length:6M

Burners

Imported from USA  220V 105000-350000Btu/H

Diesel Tank Capacity(L)

62

Optional Auxiliary

Equipment Section

1. Select the trailer walking way,trailer/automatic walking;

2. LED floodlight, for the convenience of night construction 36W low power consumption;

3. LED Guiding Device, improve the security during use.

Recommended products

Learn More

Recommended Case

Learn More
Online message

Products

Crack Sealing Machine
Road Cutting Machine
Maintenance Vehicle
Yes, I would like to receive further sales and marketing information and product updates for DOAN and its expansion network.
We will contact you within 24 hours

Sales Hotline

+86-021-58211911

Sales Hotline

info@doanchina.com
Copyright ©2019 Shanghai Doan Machinery Technology Co.,Ltd.
Chat online Email us TOP